NOTES ON COMMITTING TO EMACS'S BAZAAR REPO -*- outline -*- * Install changes only on one branch, let them get merged elsewhere if needed. In particular, install bug-fixes only on the release branch (if there is one) and let them get synced to the trunk; do not install them by hand on the trunk as well. E.g. if there is an active "emacs-23" branch and you have a bug-fix appropriate for the next Emacs-23.x release, install it only on the emacs-23 branch, not on the trunk as well. Installing things manually into more than one branch makes merges more difficult. http://lists.gnu.org/archive/html/emacs-devel/2010-03/msg01124.html The exception is, if you know that the change will be difficult to merge to the trunk (eg because the trunk code has changed a lot). In that case, it's helpful if you can apply the change to both trunk and branch yourself (when committing the branch change, indicate in the commit log that it should not be merged to the trunk; see below). * Backporting a bug-fix from the trunk to a branch (e.g. "emacs-23"). Indicate in the commit log that there is no need to merge the commit to the trunk. Anything that matches `bzrmerge-skip-regexp' will do; eg start the commit message with "Backport:". This is helpful for the person merging the release branch to the trunk. http://lists.gnu.org/archive/html/emacs-devel/2010-05/msg00262.html * Installing changes from your personal branches. If your branch has only a single commit, or many different real commits, it is fine to do a merge. If your branch has only a very small number of "real" commits, but several "merge from trunks", it is preferred that you take your branch's diff, apply it to the trunk, and commit directly, not merge. This keeps the history cleaner. In general, when working on some feature in a separate branch, it is preferable not to merge from trunk until you are done with the feature. Unless you really need some change that was done on the trunk while you were developing on the branch, you don't really need those merges; just merge once, when you are done with the feature, and Bazaar will take care of the rest. Bazaar is much better in this than CVS, so interim merges are unnecessary. Or use shelves; or rebase; or do something else. See the thread for yet another fun excursion into the exciting world of version control. http://lists.gnu.org/archive/html/emacs-devel/2010-04/msg00086.html * Installing changes from gnulib Some of the files in Emacs are copied from gnulib. To synchronize these files from the version of gnulib that you have checked out into a sibling directory of your branch, type "make sync-from-gnulib"; this will check out the latest version of gnulib if there is no sibling directory already. It is a good idea to run "bzr status" afterwards, so that if a gnulib module added a file, you can record the new file using "bzr add". After synchronizing from gnulib, do a "make" in the usual way. To change the set of gnulib modules, change the GNULIB_MODULES variable in the top-level Makefile.in, and then run: ./config.status make sync-from-gnulib bzr status The last command will mention files that may need to be added using "bzr add". If you remove a gnulib module, or if a gnulib module removes a file, then remove the corresponding files by hand. * How to merge changes from emacs-23 to trunk The following description uses bound branches, presumably it works in a similar way with unbound ones. 0) (This step is only necessary if using bzr older than 2.4.0.) Get the bzr changelog_merge plugin: cd ~/.bazaar/plugins bzr branch http://bazaar.launchpad.net/~spiv/bzr-changelog-merge/trunk changelog_merge This plugin should make merging ChangeLogs smoother. It merges new entries to the top of the file, rather than trying to fit them in mid-way through. Newer versions of the plugin should also be able to deal with changes to *old* ChangeLog entries, that should not be floated to the head of the file (see launchpad#723968). It is included in bzr from 2.4.0 onwards, so remember to delete the copy in ~/.bazaar if you upgrade bzr. Maybe the default Emacs behavior without this plugin is better, though, it's not clear yet. 1) Get clean, up-to-date copies of the emacs-23 and trunk branches. Check for any uncommitted changes with bzr status. 2) M-x cd /path/to/trunk The first time only, do this: cd .bzr/branch Add the following line to branch.conf: changelog_merge_files = ChangeLog 3) load admin/bzrmerge.el 4) M-x bzrmerge RET /path/to/emacs-23 RET It will prompt about revisions that should be skipped, based on the regexp in bzrmerge-missing. If there are more revisions that you know need skipping, you'll have to do that by hand. 5) It will stop if there are any conflicts. Resolve them. Using smerge-mode, there are menu items to skip to the next conflict, and to take either the trunk, branch, or both copies. 6) After resolving all conflicts, you might need to run the bzmerge command again if there are more revisions still to merge. Do not commit (or exit Emacs) until you have run bzrmerge to completion. Before committing, check bzr status and bzr diff output. If you have run bzrmerge enough times, the "pending merge tip" in bzr status should be the last revision from the emacs-23 branch, and bzr status -v should show all the revisions you expect to merge. (Note that it will also show "skipped" revisions. This is expected, and is due to a technical limitation of bzr. The log data for those revisions gets merged, the actual changes themselves do not. http://lists.gnu.org/archive/html/emacs-devel/2011-01/msg00609.html ) In particular, check the ChangeLog entries (eg in case too many entries have been included or whitespace between entries needs fixing). bzrmerge tries to fix up the dates to today's date, but it only does this where there are conflicts. If you used the changelog_merge plugin, there won't be any conflicts, and (at time of writing) you will need to adjust dates by hand. In any case, if someone made multiple ChangeLog entries on different days in the branch, you may wish to collapse them all to a single entry for that author in the trunk (because in the trunk they all appear under the same date). Obviously, if there are multiple changes to the same file by different authors, don't break the logical ordering in doing this. Notes: 1) A lot that was in tramp.el in emacs-23 has moved to tramp-sh.el in the trunk. If you end up with a conflict in tramp.el, the changes may need to go to tramp-sh.el instead. Remember to update the file name in the ChangeLog. 2) If a file is modified in emacs-23, and deleted in the trunk, you get a "contents conflict". Assuming the changes don't need to be in the trunk at all, use `bzr resolve path/to/file --take-this' to keep the trunk version. Prior to bzr 2.2.3, this may fail. You can just delete the .OTHER etc files by hand and use bzr resolve path/to/file. 3) Conflicts in autoload md5sums in comments. Strictly speaking, the right thing to do is merge everything else, resolve the conflict by choosing either the trunk or branch version, then run `make -C lisp autoloads' to update the md5sums to the correct trunk value before committing. * Re-adding a file that has been removed from the repository It's easy to get this wrong. Let's suppose you've done: bzr remove file; bzr commit and now, sometime later, you realize this was a mistake and file needs to be brought back. DON'T just do: bzr add file; bzr commit This restores file, but without its history (`bzr log file' will be very short). This is because file gets re-added with a new file-id (use `bzr file-id file' to see the id). Instead of adding the file, try: bzr revert -rN file; bzr commit where revision N+1 is the one where file was removed. You could also try `bzr add --file-ids-from', if you have a copy of another branch where file still exists. * Loggerhead Loggerhead is the bzr tool for viewing a repository over http (similar to ViewVC). The central version is at http://bzr.savannah.gnu.org/lh/emacs, but if you just like the way this interface presents data, then if you have your own copy of the repository, you can operate your own Loggerhead server in stand-alone mode, and so help to reduce the load on Savannah: bzr branch lp:loggerhead ~/.bazaar/plugins/loggerhead cd /path/to/emacs/bzr bzr serve --http You may need to install some Python dependencies to get this command to work. For example, on RHEL6 I needed: yum install python-paste python-simplejson yum --enablerepo=epel install python-simpletal Then point your web-browser to http://127.0.0.1:8080/ .