1 ;; Incremental search minor mode.
2 ;; Copyright (C) 1992 Free Software Foundation, Inc.
5 ;; isearch-mode|Daniel LaLiberte|liberte@cs.uiuc.edu
6 ;; |A minor mode replacement for isearch.el.
7 ;; |$Date: 1992/11/07 06:17:04 $|$Revision: 1.15 $|~/modes/isearch-mode.el
9 ;; This file is not yet part of GNU Emacs, but it is based almost
10 ;; entirely on isearch.el which is part of GNU Emacs.
12 ;; GNU Emacs is distributed in the hope that it will be useful,
13 ;; but WITHOUT ANY WARRANTY. No author or distributor
14 ;; accepts responsibility to anyone for the consequences of using it
15 ;; or for whether it serves any particular purpose or works at all,
16 ;; unless he says so in writing. Refer to the GNU Emacs General Public
17 ;; License for full details.
19 ;; Everyone is granted permission to copy, modify and redistribute
20 ;; GNU Emacs, but only under the conditions described in the
21 ;; GNU Emacs General Public License. A copy of this license is
22 ;; supposed to have been given to you along with GNU Emacs so you
23 ;; can know your rights and responsibilities. It should be in a
24 ;; file named COPYING. Among other things, the copyright notice
25 ;; and this notice must be preserved on all copies.
27 ;;;====================================================================
30 ;; Searching with isearch-mode.el should work just like isearch.el,
31 ;; except it is done in a temporary minor mode that terminates when
32 ;; you finish searching.
34 ;; To use isearch-mode instead of the standard isearch.el, add the
35 ;; following to your .emacs file. The standard key bindings to
36 ;; isearch-forward, etc, will then use isearch-mode instead of
39 ;; (fset 'isearch 'isearch-mode)
40 ;; (autoload 'isearch-mode "isearch-mode")
42 ;; For programmed use of isearch-mode, e.g. calling (isearch-forward),
43 ;; isearch-mode behaves modally and does not return until the search
44 ;; is completed. It uses a recursive-edit to behave this way. Note:
45 ;; gnus does it wrong: (call-interactively 'isearch-forward).
47 ;; If any package you use invokes isearching non-interactively to get
48 ;; the modal behavior described above, you must use the redefinitions
49 ;; of isearch-forward, etc. found in this file instead of those in
50 ;; loaddefs.el. The simplest way to ensure this is to just load
51 ;; isearch-mode explicitly in your .emacs instead of using the above
54 ;; (load "isearch-mode")
56 ;; The key bindings active within isearch-mode are defined below in
57 ;; `isearch-mode-map' which is given bindings close to the default
58 ;; characters of the original isearch.el. With `isearch-mode',
59 ;; however, you can bind multi-character keys and it should be easier
60 ;; to add new commands. One bug though: keys with meta-prefix cannot
61 ;; be longer than two chars. Also see minibuffer-local-isearch-map
62 ;; for bindings active during `isearch-edit-string'.
64 ;; Note to emacs version 19 users: isearch-mode should work even if
65 ;; you switch windows with the mouse, in which case isearch-mode is
66 ;; terminated automatically before the switch. This is true of lemacs
67 ;; too, with a few more cleanups I've neglected in this release.
68 ;; No one has supplied patches for epoch yet.
70 ;; The search ring and completion commands automatically put you in
71 ;; the minibuffer to edit the string. This gives you a chance to
72 ;; modify the search string before executing the search. There are
73 ;; three commands to terminate the editing: C-s and C-r exit the
74 ;; minibuffer and search forward and reverse respectively, while C-m
75 ;; exits and does a nonincremental search.
77 ;; Exiting immediately from isearch uses isearch-edit-string instead
78 ;; of nonincremental-search, if search-nonincremental-instead is non-nil.
79 ;; The name of this option should probably be changed if we decide to
80 ;; keep the behavior. No point in forcing nonincremental search until
81 ;; the last possible moment.
84 ;; - Integrate the emacs 19 generalized commmand history.
85 ;; - Think about incorporating query-replace.
86 ;; - Hooks and options for failed search.
88 ;;;====================================================================
91 ;;; $Header: /home/gd/gnu/emacs/19.0/lisp/RCS/isearch-mode.el,v 1.15 1992/11/07 06:17:04 jimb Exp jimb $
92 ;;; $Log: isearch-mode.el,v $
93 ; Revision 1.15 1992/11/07 06:17:04 jimb
94 ; * isearch.el (isearch-frames-exist): This isn't what we want -
96 ; (isearch-gnu-emacs-events): non-nil if should expect events in the
97 ; style generated by GNU Emacs 19. Set if set-frame-height is
98 ; fboundp; this is true on any GNU Emacs 19, whether or not it was
99 ; compiled with multiple frame support.
100 ; (isearch-mode-map): Test isearch-gnu-emacs-events instead of
101 ; isearch-frames-exist to see if we should bind switch-frame events.
102 ; (isearch-update): Test isearch-gnu-emacs-events instead of
103 ; isearch-frames-exist to see if unread-command-char's quiescent
104 ; value is nil or -1.
106 ; Revision 1.14 1992/11/01 22:10:59 rms
107 ; (isearch-search): Handle all sorts of errors from regexp search.
109 ; Revision 1.13 1992/10/27 04:11:46 rms
110 ; (isearch-edit-string):
111 ; Bind cursor-in-echo-area only around read-char/allocate-event.
113 ; Revision 1.12 1992/10/20 21:21:47 rms
114 ; (isearch-mode-map): Make the top-level keymap dense.
115 ; Explicitly bind control characters at that level.
117 ; Revision 1.11 1992/10/11 05:25:11 rms
118 ; (isearch-ring-advance-edit): Delete spurious `)'.
120 ; Revision 1.10 1992/09/21 08:28:43 rms
123 ;;; Revision 1.4 92/09/14 16:26:02 liberte
124 ;;; Added prefix args to isearch-forward, etc. to switch between
125 ;;; string and regular expression searching.
126 ;;; Added some support for lemacs.
127 ;;; Added general isearch-highlight option - but only for lemacs so far.
128 ;;; Added support for frame switching in emacs 19.
129 ;;; Added word search option to isearch-edit-string.
130 ;;; Renamed isearch-quit to isearch-abort.
131 ;;; Numerous changes to comments and doc strings.
133 ;;; Revision 1.3 92/06/29 13:10:08 liberte
134 ;;; Moved modal isearch-mode handling into isearch-mode.
135 ;;; Got rid of buffer-local isearch variables.
136 ;;; isearch-edit-string used by ring adjustments, completion, and
137 ;;; nonincremental searching. C-s and C-r are additional exit commands.
138 ;;; Renamed all regex to regexp.
139 ;;; Got rid of found-start and found-point globals.
140 ;;; Generalized handling of upper-case chars.
142 ;;; Revision 1.2 92/05/27 11:33:57 liberte
143 ;;; Emacs version 19 has a search ring, which is supported here.
144 ;;; Other fixes found in the version 19 isearch are included here.
146 ;;; Also see variables search-caps-disable-folding,
147 ;;; search-nonincremental-instead, search-whitespace-regexp, and
148 ;;; commands isearch-toggle-regexp, isearch-edit-string.
150 ;;; semi-modal isearching is supported.
153 ;;; 3/18/92 Fixed invalid-regexp.
154 ;;; 3/18/92 Fixed yanking in regexps.
158 ;;;=========================================================================
161 ;; isearch-mode takes advantage of the features provided by several
162 ;; different versions of emacs. Rather than testing the version of
163 ;; emacs, several constants are defined, one for each of the features.
164 ;; Each of the tests below must work on any version of emacs.
165 ;; (Perhaps provide and featurep could be used for this purpose.)
167 (defconst isearch-gnu-emacs-events
(fboundp 'set-frame-height
)) ;; emacs 19
168 (defconst isearch-pre-command-hook-exists
(boundp 'pre-command-hook
)) ;; lemacs
169 (defconst isearch-event-data-type nil
) ;; lemacs
171 (defconst search-exit-option t
172 "*Non-nil means random control characters terminate incremental search.")
174 (defvar search-slow-window-lines
1
175 "*Number of lines in slow search display windows.
176 These are the short windows used during incremental search on slow terminals.
177 Negative means put the slow search window at the top (normally it's at bottom)
178 and the value is minus the number of lines.")
180 (defvar search-slow-speed
1200
181 "*Highest terminal speed at which to use \"slow\" style incremental search.
182 This is the style where a one-line window is created to show the line
183 that the search has reached.")
185 ;;;========================================================================
186 ;;; Some additional options and constants.
188 (defvar search-upper-case t
189 "*If non-nil, upper case chars disable case fold searching.
190 That is, upper and lower case chars must match exactly.
191 This applies no matter where the chars come from, but does not
192 apply to chars in regexps that are prefixed with `\\'.
193 If this value is `not-yanks', yanked text is always downcased.")
195 (defvar search-nonincremental-instead t
196 "*If non-nil, do a nonincremental search instead if exiting immediately.
197 Actually, `isearch-edit-string' is called to let you enter the search
198 string, and RET terminates editing and does a nonincremental search.")
200 (defconst search-whitespace-regexp
"\\s-+"
201 "*If non-nil, regular expression to match a sequence of whitespace chars.
202 You might want to use something like \"[ \\t\\r\\n]+\" instead.")
204 ;; I removed the * from the doc string because highlighting is not
205 ;; currently a clean thing to do. Once highlighting is made clean,
206 ;; this feature can be re-enabled and advertised.
207 (defvar search-highlight nil
208 "Whether isearch and query-replace should highlight the text which
209 currently matches the search-string.")
212 (defvar isearch-mode-hook nil
213 "Function(s) to call after starting up an incremental search.")
215 (defvar isearch-mode-end-hook nil
216 "Function(s) to call after terminating an incremental search.")
218 ;;;==================================================================
221 (defvar search-ring nil
222 "List of search string sequences.")
223 (defvar regexp-search-ring nil
224 "List of regular expression search string sequences.")
226 (defconst search-ring-max
16
227 "*Maximum length of search ring before oldest elements are thrown away.")
228 (defconst regexp-search-ring-max
16
229 "*Maximum length of regexp search ring before oldest elements are thrown away.")
231 (defvar search-ring-yank-pointer nil
232 "Index in `search-ring' of last string reused.
234 (defvar regexp-search-ring-yank-pointer nil
235 "Index in `regexp-search-ring' of last string reused.
238 (defvar search-ring-update nil
239 "*Non-nil if advancing or retreating in the search ring should cause search.
240 Default value, nil, means edit the string instead.")
242 ;;;====================================================
243 ;;; Define isearch-mode keymap.
245 (defvar isearch-mode-map nil
246 "Keymap for isearch-mode.")
252 ;; Make function keys, etc, exit the search.
253 (define-key map
[t] 'isearch-other-control-char)
254 ;; Control chars, by default, end isearch mode transparently.
255 ;; We need these explicit definitions because, in a dense keymap,
256 ;; the binding for t does not affect characters.
257 ;; We use a dense keymap to save space.
259 (define-key map (make-string 1 i) 'isearch-other-control-char)
262 ;; Printing chars extend the selection by default.
265 (define-key map (make-string 1 i) 'isearch-printing-char)
268 ;; Several non-printing chars change the searching behavior.
269 (define-key map "\C-s" 'isearch-repeat-forward)
270 (define-key map "\C-r" 'isearch-repeat-backward)
271 (define-key map "\177" 'isearch-delete-char)
272 (define-key map "\C-g" 'isearch-abort)
274 (define-key map "\C-q" 'isearch-quote-char)
276 ;; (define-key map "\r" 'isearch-return-char)
277 ;; For version 19, RET (C-m) terminates search and LFD (C-j) matches eol.
278 ;; We could make this conditional.
279 (define-key map "\r" 'isearch-exit)
280 (define-key map "\C-j" 'isearch-printing-char)
281 (define-key map "\t" 'isearch-printing-char)
282 (define-key map " " 'isearch-whitespace-chars)
284 (define-key map "\C-w" 'isearch-yank-word)
285 (define-key map "\C-y" 'isearch-yank-line)
287 ;; Define keys for regexp chars * ? |.
288 ;; Nothing special for + because it matches at least once.
289 (define-key map "*" 'isearch-*-char)
290 (define-key map "?" 'isearch-*-char)
291 (define-key map "|" 'isearch-|-char)
293 ;; You can reenable global keys by binding them locally to nil.
294 ;; For the help char this doesnt work quite as expected because
295 ;; isearch-mode is not a major mode. Also the echo area is not
296 ;; restored after the help command while isearch-mode is
297 ;; still active. Furthermore, we should not assume that the
298 ;; help-command is on C-h. But here is how it would be done:
299 ;; (define-key map "\C-h" nil)
301 ;; Instead bind C-h to special help command for isearch-mode.
302 (define-key map "\C-h" 'isearch-mode-help)
304 ;; To handle local bindings with meta char prefix keys, define
305 ;; another full keymap. This must be done for any other prefix
306 ;; keys as well, one full keymap per char of the prefix key. It
307 ;; would be simpler to disable the global keymap, and/or have a
308 ;; default local key binding for any key not otherwise bound.
309 (define-key map (char-to-string meta-prefix-char) (make-sparse-keymap))
310 (define-key map (vector meta-prefix-char t) 'isearch-other-meta-char)
313 ;;; (define-key map (char-to-string (+ 128 i));; Needs to be generalized.
314 ;;; 'isearch-other-meta-char)
317 (define-key map "\M-n" 'isearch-ring-advance)
318 (define-key map "\M-p" 'isearch-ring-retreat)
320 (define-key map "\M-\t" 'isearch-complete)
322 ;; For emacs 19, switching frames should terminate isearch-mode
323 (if isearch-gnu-emacs-events
324 (define-key map [switch-frame] 'isearch-switch-frame-handler))
326 (setq isearch-mode-map map)
329 ;; Some bindings you may want to put in your isearch-mode-hook.
330 ;; Suggest some alternates...
331 ;; (define-key isearch-mode-map "\C-t" 'isearch-toggle-regexp)
332 ;; (define-key isearch-mode-map "\C-^" 'isearch-edit-string)
335 (defvar minibuffer-local-isearch-map nil
336 "Keymap for editing isearch strings in the minibuffer.")
338 (or minibuffer-local-isearch-map
339 (let ((map (copy-keymap minibuffer-local-map)))
340 (define-key map "\r" 'isearch-nonincremental-exit-minibuffer)
341 (define-key map "\M-n" 'isearch-ring-advance-edit)
342 (define-key map "\M-p" 'isearch-ring-retreat-edit)
343 (define-key map "\M-\t" 'isearch-complete-edit)
344 (define-key map "\C-s" 'isearch-forward-exit-minibuffer)
345 (define-key map "\C-r" 'isearch-reverse-exit-minibuffer)
346 (setq minibuffer-local-isearch-map map)
349 ;;;========================================================
350 ;; Internal variables declared globally for byte-compiler.
351 ;; These are all set with setq while isearching
352 ;; and bound locally while editing the search string.
354 (defvar isearch-forward nil) ; Searching in the forward direction.
355 (defvar isearch-regexp nil) ; Searching for a regexp.
356 (defvar isearch-word nil) ; Searching for words.
358 (defvar isearch-cmds nil) ; Stack of search status sets.
359 (defvar isearch-string "") ; The current search string.
360 (defvar isearch-message "") ; text-char-description version of isearch-string
362 (defvar isearch-success t) ; Searching is currently successful.
363 (defvar isearch-invalid-regexp nil) ; Regexp not well formed.
364 (defvar isearch-other-end nil) ; Start (end) of match if forward (backward).
365 (defvar isearch-wrapped nil) ; Searching restarted from the top (bottom).
366 (defvar isearch-barrier 0)
368 (defvar isearch-case-fold-search nil) ; case-fold-search while searching.
370 (defvar isearch-adjusted nil)
371 (defvar isearch-slow-terminal-mode nil)
372 ;;; If t, using a small window.
373 (defvar isearch-small-window nil)
374 (defvar isearch-opoint 0)
375 ;;; The window configuration active at the beginning of the search.
376 (defvar isearch-window-configuration nil)
377 (defvar isearch-old-local-map nil)
379 ;; Flag to indicate a yank occurred, so don't move the cursor.
380 (defvar isearch-yank-flag nil)
382 ;;; A function to be called after each input character is processed.
383 ;;; (It is not called after characters that exit the search.)
384 ;;; It is only set from an optional argument to `isearch-mode'.
385 (defvar isearch-op-fun nil)
387 ;;; Is isearch-mode in a recursive edit for modal searching.
388 (defvar isearch-recursive-edit nil)
390 ;;; Should isearch be terminated after doing one search?
391 (defvar isearch-nonincremental nil)
393 ;; New value of isearch-forward after isearch-edit-string.
394 (defvar isearch-new-forward nil)
397 ;;;==============================================================
398 ;; Minor-mode-alist changes - kind of redundant with the
399 ;; echo area, but if isearching in multiple windows, it can be useful.
401 (or (assq 'isearch-mode minor-mode-alist)
402 (nconc minor-mode-alist
403 (list '(isearch-mode isearch-mode))))
405 (defvar isearch-mode nil) ;; Name of the minor mode, if non-nil.
406 (make-variable-buffer-local 'isearch-mode)
408 (define-key global-map "\C-s" 'isearch-forward)
409 (define-key esc-map "\C-s" 'isearch-forward-regexp)
410 (define-key global-map "\C-r" 'isearch-backward)
411 (define-key esc-map "\C-r" 'isearch-backward-regexp)
413 ;;;===============================================================
414 ;;; Entry points to isearch-mode.
415 ;;; These four functions should replace those in loaddefs.el
416 ;;; An alternative is to fset isearch-forward etc to isearch-mode,
417 ;;; and look at this-command to set the options accordingly.
419 (defun isearch-forward (&optional regexp-p)
421 Do incremental search forward.
422 With a prefix argument, do an incremental regular expression search instead.
424 As you type characters, they add to the search string and are found.
425 The following non-printing keys are bound in `isearch-mode-map'.
427 Type \\[isearch-delete-char] to cancel characters from end of search string.
428 Type \\[isearch-exit] to exit, leaving point at location found.
429 Type LFD (C-j) to match end of line.
430 Type \\[isearch-repeat-forward] to search again forward,\
431 \\[isearch-repeat-backward] to search again backward.
432 Type \\[isearch-yank-word] to yank word from buffer onto end of search\
433 string and search for it.
434 Type \\[isearch-yank-line] to yank rest of line onto end of search string\
436 Type \\[isearch-quote-char] to quote control character to search for it.
437 Type \\[isearch-whitespace-chars] to match all whitespace chars in regexp.
438 \\[isearch-abort] while searching or when search has failed cancels input\
440 been found successfully.
441 \\[isearch-abort] when search is successful aborts and moves point to\
444 Also supported is a search ring of the previous 16 search strings.
445 Type \\[isearch-ring-advance] to search for the next item in the search ring.
446 Type \\[isearch-ring-retreat] to search for the previous item in the search\
448 Type \\[isearch-complete] to complete the search string using the search ring.
450 The above keys, bound in `isearch-mode-map', are often controlled by
451 options; do M-x apropos on search-.* to find them.
452 Other control and meta characters terminate the search
453 and are then executed normally (depending on `search-exit-option').
455 If this function is called non-interactively, it does not return to
456 the calling function until the search is done."
459 (isearch-mode t (not (null regexp-p)) nil (not (interactive-p))))
461 (defun isearch-forward-regexp (&optional regexp-p)
463 Do incremental search forward for regular expression.
464 With a prefix argument, do a regular string search instead.
465 Like ordinary incremental search except that your input
466 is treated as a regexp. See \\[isearch-forward] for more info."
468 (isearch-mode t (null regexp-p) nil (not (interactive-p))))
470 (defun isearch-backward (&optional regexp-p)
472 Do incremental search backward.
473 With a prefix argument, do a regular expression search instead.
474 See \\[isearch-forward] for more information."
476 (isearch-mode nil (not (null regexp-p)) nil (not (interactive-p))))
478 (defun isearch-backward-regexp (&optional regexp-p)
480 Do incremental search backward for regular expression.
481 With a prefix argument, do a regular string search instead.
482 Like ordinary incremental search except that your input
483 is treated as a regexp. See \\[isearch-forward] for more info."
485 (isearch-mode nil (null regexp-p) nil (not (interactive-p))))
488 (defun isearch-mode-help ()
490 (describe-function 'isearch-forward)
494 ;;;==================================================================
495 ;; isearch-mode only sets up incremental search for the minor mode.
496 ;; All the work is done by the isearch-mode commands.
499 ;;(defconst isearch-commands '(isearch-forward isearch-backward
500 ;; isearch-forward-regexp isearch-backward-regexp)
501 ;; "List of commands for which isearch-mode does not recursive-edit.")
504 (defun isearch-mode (forward &optional regexp op-fun recursive-edit word-p)
505 "Start isearch minor mode. Called by isearch-forward, etc."
507 ;; Initialize global vars.
508 (setq isearch-forward forward
509 isearch-regexp regexp
511 isearch-op-fun op-fun
512 isearch-case-fold-search case-fold-search
518 isearch-barrier (point)
520 isearch-yank-flag nil
521 isearch-invalid-regexp nil
522 ;; Use (baud-rate) for now, for sake of other versions.
523 isearch-slow-terminal-mode (and (<= (baud-rate) search-slow-speed)
525 (* 4 search-slow-window-lines)))
526 isearch-other-end nil
527 isearch-small-window nil
529 isearch-opoint (point)
530 isearch-window-configuration (current-window-configuration)
531 isearch-old-local-map (current-local-map)
532 search-ring-yank-pointer nil
533 regexp-search-ring-yank-pointer nil)
534 (if isearch-pre-command-hook-exists
535 (add-hook 'pre-command-hook 'isearch-pre-command-hook))
536 (setq isearch-mode " Isearch") ;; forward? regexp?
537 (set-buffer-modified-p (buffer-modified-p)) ; update modeline
541 (use-local-map isearch-mode-map)
543 (run-hooks 'isearch-mode-hook)
545 ;; isearch-mode can be made modal (in the sense of not returning to
546 ;; the calling function until searching is completed) by entering
547 ;; a recursive-edit and exiting it when done isearching.
548 (if recursive-edit (recursive-edit))
552 ;;;====================================================
553 ;; Some high level utilities. Others below.
555 (defun isearch-update ()
556 ;; Called after each command to update the display.
557 (if (if isearch-event-data-type
558 (null unread-command-event)
559 (if isearch-gnu-emacs-events
560 (null unread-command-event)
561 (< unread-command-char 0)))
563 (if (not (input-pending-p))
565 (if (and isearch-slow-terminal-mode
566 (not (or isearch-small-window
567 (pos-visible-in-window-p))))
568 (let ((found-point (point)))
569 (setq isearch-small-window t)
570 (move-to-window-line 0)
571 (let ((window-min-height 1))
572 (split-window nil (if (< search-slow-window-lines 0)
573 (1+ (- search-slow-window-lines))
575 (1+ search-slow-window-lines)))))
576 (if (< search-slow-window-lines 0)
577 (progn (vertical-motion (- 1 search-slow-window-lines))
578 (set-window-start (next-window) (point))
579 (set-window-hscroll (next-window)
581 (set-window-hscroll (selected-window) 0))
583 (goto-char found-point)))
584 (if isearch-other-end
585 (if (< isearch-other-end (point)) ; isearch-forward?
586 (isearch-highlight isearch-other-end (point))
587 (isearch-highlight (point) isearch-other-end)))
589 (setq ;; quit-flag nil not for isearch-mode
591 isearch-yank-flag nil)
595 (defun isearch-done (&optional nopush)
596 ;; Called by all commands that terminate isearch-mode.
597 ;; If NOPUSH is non-nil, we don't push the string on the search ring.
598 (use-local-map isearch-old-local-map)
599 ;; (setq pre-command-hook isearch-old-pre-command-hook) ; for lemacs
600 (isearch-dehighlight t)
601 (let ((found-start (window-start (selected-window)))
602 (found-point (point)))
603 (set-window-configuration isearch-window-configuration)
605 ;; If there was movement, mark the starting position.
606 ;; Maybe should test difference between and set mark iff > threshold.
607 (if (/= (point) isearch-opoint)
608 (push-mark isearch-opoint)
609 ;; (message "") why is this needed?
611 (if isearch-small-window
612 (goto-char found-point)
613 ;; Exiting the save-window-excursion clobbers window-start; restore it.
614 (set-window-start (selected-window) found-start t)))
616 (setq isearch-mode nil)
617 (set-buffer-modified-p (buffer-modified-p)) ;; update modeline
619 (if (and (> (length isearch-string) 0) (not nopush))
620 ;; Update the ring data.
622 (if (or (null regexp-search-ring)
623 (not (string= isearch-string (car regexp-search-ring))))
625 (setq regexp-search-ring
626 (cons isearch-string regexp-search-ring))
627 (if (> (length regexp-search-ring) regexp-search-ring-max)
628 (setcdr (nthcdr (1- search-ring-max) regexp-search-ring)
630 (if (or (null search-ring)
631 (not (string= isearch-string (car search-ring))))
633 (setq search-ring (cons isearch-string search-ring))
634 (if (> (length search-ring) search-ring-max)
635 (setcdr (nthcdr (1- search-ring-max) search-ring) nil))))))
637 (run-hooks 'isearch-mode-end-hook)
638 (if isearch-recursive-edit (exit-recursive-edit)))
640 ;;;=======================================================
641 ;;; Switching buffers should first terminate isearch-mode.
642 ;;; This is done quite differently for each varient of emacs.
643 ;;; For lemacs, see Exiting in lemacs below
645 ;; For Emacs 19, the frame switch event is handled.
646 (defun isearch-switch-frame-handler ()
647 (interactive) ;; Is this necessary?
648 ;; First terminate isearch-mode.
650 (select-frame (car (cdr (isearch-last-command-char)))))
652 ;;;========================================================
655 ;;;====================================================
656 ;; Commands active while inside of the isearch minor mode.
658 (defun isearch-exit ()
659 "Exit search normally.
660 However, if this is the first command after starting incremental
661 search and `search-nonincremental-instead' is non-nil, do a
662 nonincremental search instead via `isearch-edit-string'."
664 (if (and search-nonincremental-instead
665 (= 0 (length isearch-string)))
666 (let ((isearch-nonincremental t))
667 (isearch-edit-string)))
671 (defun isearch-edit-string ()
672 "Edit the search string in the minibuffer.
673 The following additional command keys are active while editing.
674 \\<minibuffer-local-isearch-map>
675 \\[exit-minibuffer] to resume incremental searching with the edited string.
676 \\[isearch-nonincremental-exit-minibuffer] to do one nonincremental search.
677 \\[isearch-forward-exit-minibuffer] to resume isearching forward.
678 \\[isearch-backward-exit-minibuffer] to resume isearching backward.
679 \\[isearch-ring-advance-edit] to replace the search string with the next item in the search ring.
680 \\[isearch-ring-retreat-edit] to replace the search string with the previou item in the search ring.
681 \\[isearch-complete-edit] to complete the search string using the search ring.
683 If first char entered is \\[isearch-yank-word], then do word search instead."
685 ;; This code is very hairy for several reasons, explained in the code.
686 ;; Mainly, isearch-mode must be terminated while editing and then restarted.
687 ;; If there were a way to catch any change of buffer from the minibuffer,
688 ;; this could be simplified greatly.
689 ;; Editing doesnt back up the search point. Should it?
692 (let (isearch-nonincremental ; should search nonincrementally?
694 ;; Locally bind all isearch global variables to protect them
695 ;; from recursive isearching.
696 ;; isearch-string -message and -forward are not bound
697 ;; so they may be changed. Instead, save the values.
698 (isearch-new-string isearch-string)
699 (isearch-new-message isearch-message)
700 (isearch-new-forward isearch-forward)
701 (isearch-new-word isearch-word)
703 (isearch-regexp isearch-regexp)
704 (isearch-op-fun isearch-op-fun)
705 (isearch-cmds isearch-cmds)
706 (isearch-success isearch-success)
707 (isearch-wrapped isearch-wrapped)
708 (isearch-barrier isearch-barrier)
709 (isearch-adjusted isearch-adjusted)
710 (isearch-yank-flag isearch-yank-flag)
711 (isearch-invalid-regexp isearch-invalid-regexp)
712 (isearch-other-end isearch-other-end)
713 (isearch-opoint isearch-opoint)
714 (isearch-slow-terminal-mode isearch-slow-terminal-mode)
715 (isearch-small-window isearch-small-window)
716 (isearch-recursive-edit isearch-recursive-edit)
717 ;; Save current configuration so we can restore it here.
718 (isearch-window-configuration (current-window-configuration))
721 ;; Actually terminate isearching until editing is done.
722 ;; This is so that the user can do anything without failure,
723 ;; like switch buffers and start another isearch, and return.
726 (exit nil)) ; was recursive editing
728 (isearch-message) ;; for read-char
730 (let* (;; Why does following read-char echo?
731 ;;(echo-keystrokes 0) ;; not needed with above message
732 (e (let ((cursor-in-echo-area t))
733 (if isearch-event-data-type
734 (allocate-event) (read-char))))
735 ;; Binding minibuffer-history-symbol to nil is a work-around
736 ;; for some incompatibility with gmhist.
737 (minibuffer-history-symbol))
738 ;; If the first character the user types when we prompt them
739 ;; for a string is the yank-word character, then go into
740 ;; word-search mode. Otherwise unread that character and
741 ;; read a key the normal way.
742 ;; Word search does not apply (yet) to regexp searches,
743 ;; no check is made here.
744 (message (isearch-message-prefix nil nil t))
745 (if (eq 'isearch-yank-word
749 (if isearch-event-data-type
750 (or (event-to-character (next-command-event e)) 0)
752 (setq isearch-word t ;; so message-prefix is right
755 (setq cursor-in-echo-area nil)
756 (setq isearch-new-string
758 (read-from-minibuffer (isearch-message-prefix)
760 minibuffer-local-isearch-map nil
762 isearch-new-message (mapconcat 'text-char-description
763 isearch-new-string "")))
764 ;; Always resume isearching by restarting it.
765 (isearch-mode isearch-forward
768 isearch-recursive-edit
771 ;; Copy new local values to isearch globals
772 (setq isearch-string isearch-new-string
773 isearch-message isearch-new-message
774 isearch-forward isearch-new-forward
775 isearch-word isearch-new-word))
777 ;; Empty isearch-string means use default.
778 (if (= 0 (length isearch-string))
779 (setq isearch-string (car (if isearch-regexp regexp-search-ring
781 ;; This used to set the last search string,
782 ;; but I think it is not right to do that here.
783 ;; Only the string actually used should be saved.
786 ;; Reinvoke the pending search.
790 (if isearch-nonincremental
792 ;; (sit-for 1) ;; needed if isearch-done does: (message "")
795 (quit ; handle abort-recursive-edit
796 (isearch-abort) ;; outside of let to restore outside global values
799 (defun isearch-nonincremental-exit-minibuffer ()
801 (setq isearch-nonincremental t)
804 (defun isearch-forward-exit-minibuffer ()
806 (setq isearch-new-forward t)
809 (defun isearch-reverse-exit-minibuffer ()
811 (setq isearch-new-forward nil)
815 (defun isearch-abort ()
816 "Abort incremental search mode if searching is successful, signalling quit.
817 Otherwise, revert to previous successful search and continue searching.
818 Use `isearch-exit' to quit without signalling."
820 ;; (ding) signal instead below, if quiting
823 ;; If search is successful, move back to starting point
824 ;; and really do quit.
825 (progn (goto-char isearch-opoint)
826 (isearch-done t) ; exit isearch
827 (signal 'quit nil)) ; and pass on quit signal
828 ;; If search is failing, rub out until it is once more successful.
829 (while (not isearch-success) (isearch-pop-state))
833 (defun isearch-repeat (direction)
834 ;; Utility for isearch-repeat-forward and -backward.
835 (if (eq isearch-forward (eq direction 'forward))
836 ;; C-s in forward or C-r in reverse.
837 (if (equal isearch-string "")
838 ;; If search string is empty, use last one.
840 (or (if isearch-regexp
841 (car regexp-search-ring)
845 (mapconcat 'isearch-text-char-description
847 ;; If already have what to search for, repeat it.
851 (goto-char (if isearch-forward (point-min) (point-max)))
852 (setq isearch-wrapped t))))
853 ;; C-s in reverse or C-r in forward, change direction.
854 (setq isearch-forward (not isearch-forward)))
856 (setq isearch-barrier (point)) ; For subsequent \| if regexp.
857 (setq isearch-success t)
858 (or (equal isearch-string "")
860 ;; If repeating a search that found
861 ;; an empty string, ensure we advance.
862 (if (equal (match-end 0) (match-beginning 0))
863 (forward-char (if isearch-forward 1 -1)))
868 (defun isearch-repeat-forward ()
869 "Repeat incremental search forwards."
871 (isearch-repeat 'forward))
873 (defun isearch-repeat-backward ()
874 "Repeat incremental search backwards."
876 (isearch-repeat 'backward))
878 (defun isearch-toggle-regexp ()
879 "Toggle regexp searching on or off."
880 ;; The status stack is left unchanged.
882 (setq isearch-regexp (not isearch-regexp))
883 (if isearch-regexp (setq isearch-word nil))
886 (defun isearch-delete-char ()
887 "Discard last input item and move point back.
888 If no previous match was done, just beep."
890 (if (null (cdr isearch-cmds))
896 (defun isearch-yank (chunk)
897 ;; Helper for isearch-yank-word and isearch-yank-line
898 (let ((string (save-excursion
899 (and (not isearch-forward) isearch-other-end
900 (goto-char isearch-other-end))
910 ;; Downcase the string if not supposed to case-fold yanked strings.
911 (if (and isearch-case-fold-search
912 (eq 'not-yanks search-upper-case))
913 (setq string (downcase string)))
914 (if isearch-regexp (setq string (regexp-quote string)))
915 (setq isearch-string (concat isearch-string string)
917 (concat isearch-message
918 (mapconcat 'isearch-text-char-description
920 ;; Don't move cursor in reverse search.
921 isearch-yank-flag t))
922 (isearch-search-and-update))
925 (defun isearch-yank-word ()
926 "Pull next word from buffer into search string."
928 (isearch-yank 'word))
930 (defun isearch-yank-line ()
931 "Pull rest of line from buffer into search string."
933 (isearch-yank 'line))
936 (defun isearch-search-and-update ()
937 ;; Do the search and update the display.
938 (if (and (not isearch-success)
939 ;; unsuccessful regexp search may become
940 ;; successful by addition of characters which
941 ;; make isearch-string valid
942 (not isearch-regexp))
944 ;; In reverse search, adding stuff at
945 ;; the end may cause zero or many more chars to be
946 ;; matched, in the string following point.
947 ;; Allow all those possibilities without moving point as
948 ;; long as the match does not extend past search origin.
949 (if (and (not isearch-forward) (not isearch-adjusted)
951 (looking-at (if isearch-regexp isearch-string
952 (regexp-quote isearch-string)))
954 (or isearch-yank-flag
956 (min isearch-opoint isearch-barrier))))
957 (setq isearch-success t
958 isearch-invalid-regexp nil
959 isearch-other-end (match-end 0))
960 ;; Not regexp, not reverse, or no match at point.
961 (if (and isearch-other-end (not isearch-adjusted))
962 (goto-char (if isearch-forward isearch-other-end
965 (1+ isearch-other-end)))))
969 (if isearch-op-fun (funcall isearch-op-fun))
973 ;; *, ?, and | chars can make a regexp more liberal.
974 ;; They can make a regexp match sooner or make it succeed instead of failing.
975 ;; So go back to place last successful search started
976 ;; or to the last ^S/^R (barrier), whichever is nearer.
977 ;; + needs no special handling because the string must match at least once.
979 (defun isearch-*-char ()
980 "Handle * and ? specially in regexps."
985 (setq isearch-adjusted t)
986 (let ((cs (nth (if isearch-forward
987 5 ; isearch-other-end
989 (car (cdr isearch-cmds)))))
990 ;; (car isearch-cmds) is after last search;
991 ;; (car (cdr isearch-cmds)) is from before it.
992 (setq cs (or cs isearch-barrier))
995 (max cs isearch-barrier)
996 (min cs isearch-barrier))))))
997 (isearch-process-search-char (isearch-last-command-char)))
1000 (defun isearch-|-char ()
1001 "If in regexp search, jump to the barrier."
1005 (setq isearch-adjusted t)
1006 (goto-char isearch-barrier)))
1007 (isearch-process-search-char (isearch-last-command-char)))
1010 (defun isearch-other-control-char ()
1011 "Any other control char => unread it and exit the search normally.
1012 But only if `search-exit-option' is non-nil, the default.
1013 If it is the symbol `edit', the search string is edited in the minibuffer
1014 and the control char is unread so that it applies to editing the string."
1016 (cond ((eq search-exit-option 'edit)
1017 (isearch-unread (isearch-last-command-char))
1018 (isearch-edit-string))
1019 (search-exit-option;; any other non-nil value
1020 (isearch-unread (isearch-last-command-char))
1022 (t;; search-exit-option is nil
1023 (isearch-process-search-char (isearch-last-command-char)))))
1026 (defun isearch-other-meta-char ()
1027 "Any other meta char => exit the search normally and reread the character.
1028 But only if `search-exit-option' is non-nil, the default.
1029 If it is the symbol `edit', the search string is edited in the minibuffer
1030 and the meta character is unread so that it applies to editing the string."
1032 (cond ((eq search-exit-option 'edit)
1033 (let ((key (this-command-keys)))
1034 (isearch-unread (+ 128 (aref key (1- (length key))))))
1035 (isearch-edit-string))
1037 (let ((key (this-command-keys)))
1038 (isearch-unread (+ 128 (aref key (1- (length key))))))
1041 (isearch-process-search-string (this-command-keys)
1042 (this-command-keys)))))
1045 (defun isearch-quote-char ()
1046 "Quote special characters for incremental search."
1048 (isearch-process-search-char (read-quoted-char (isearch-message t))))
1050 (defun isearch-return-char ()
1051 "Convert return into newline for incremental search.
1054 (isearch-process-search-char ?\n))
1056 (defun isearch-printing-char ()
1057 "Any other printing character => add it to the search string and search."
1059 (isearch-process-search-char (isearch-last-command-char)))
1061 (defun isearch-whitespace-chars ()
1062 "Match all whitespace chars, if in regexp mode.
1063 If not in regexp mode, activate word search."
1066 (if search-whitespace-regexp
1067 (isearch-process-search-string search-whitespace-regexp " ")
1068 (isearch-printing-char))
1070 ;; This way of doing word search doesnt correctly extend current search.
1071 ;; (setq isearch-word t)
1072 ;; (setq isearch-adjusted t)
1073 ;; (goto-char isearch-barrier)
1074 (isearch-printing-char))))
1076 (defun isearch-process-search-char (char)
1077 ;; Append the char to the search string, update the message and re-search.
1078 (isearch-process-search-string
1079 (isearch-char-to-string char)
1080 (isearch-text-char-description char)))
1082 (defun isearch-process-search-string (string message)
1083 (setq isearch-string (concat isearch-string string)
1084 isearch-message (concat isearch-message message))
1085 (isearch-search-and-update))
1088 ;;===========================================================
1091 (defun isearch-ring-adjust1 (advance)
1092 ;; Helper for isearch-ring-adjust
1093 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
1094 (length (length ring))
1095 (yank-pointer-name (if isearch-regexp
1096 'regexp-search-ring-yank-pointer
1097 'search-ring-yank-pointer))
1098 (yank-pointer (eval yank-pointer-name)))
1101 (set yank-pointer-name
1103 (% (+ (or yank-pointer 0)
1104 (if advance (1- length) 1))
1106 (setq isearch-string (nth yank-pointer ring)
1107 isearch-message (mapconcat 'isearch-text-char-description
1108 isearch-string "")))))
1110 (defun isearch-ring-adjust (advance)
1111 ;; Helper for isearch-ring-advance and isearch-ring-retreat
1112 (if (cdr isearch-cmds) ;; is there more than one thing on stack?
1113 (isearch-pop-state))
1114 (isearch-ring-adjust1 advance)
1115 (isearch-push-state)
1116 (if search-ring-update
1120 (isearch-edit-string)
1123 (defun isearch-ring-advance ()
1124 "Advance to the next search string in the ring."
1125 ;; This could be more general to handle a prefix arg, but who would use it.
1127 (isearch-ring-adjust 'advance))
1129 (defun isearch-ring-retreat ()
1130 "Retreat to the previous search string in the ring."
1132 (isearch-ring-adjust nil))
1134 (defun isearch-ring-advance-edit (n)
1135 "Insert the next element of the search history into the minibuffer."
1137 (let* ((yank-pointer-name (if isearch-regexp
1138 'regexp-search-ring-yank-pointer
1139 'search-ring-yank-pointer))
1140 (yank-pointer (eval yank-pointer-name))
1141 (ring (if isearch-regexp regexp-search-ring search-ring))
1142 (length (length ring)))
1145 (set yank-pointer-name
1147 (% (+ (or yank-pointer 0)
1148 ;; Add LENGTH here to ensure a positive result.
1154 (insert (nth yank-pointer ring))
1155 (goto-char (point-max)))))
1157 (defun isearch-ring-retreat-edit (n)
1158 "Inserts the previous element of the search history into the minibuffer."
1160 (isearch-ring-advance-edit (- n)))
1162 ;;(defun isearch-ring-adjust-edit (advance)
1163 ;; "Use the next or previous search string in the ring while in minibuffer."
1164 ;; (isearch-ring-adjust1 advance)
1166 ;; (insert isearch-string))
1168 ;;(defun isearch-ring-advance-edit ()
1170 ;; (isearch-ring-adjust-edit 'advance))
1172 ;;(defun isearch-ring-retreat-edit ()
1173 ;; "Retreat to the previous search string in the ring while in the minibuffer."
1175 ;; (isearch-ring-adjust-edit nil))
1178 (defun isearch-complete1 ()
1179 ;; Helper for isearch-complete and isearch-complete-edit
1180 ;; Return t if completion OK, nil if no completion exists.
1181 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
1182 (alist (mapcar (function (lambda (string) (list string))) ring))
1183 (completion-ignore-case case-fold-search)
1184 (completion (try-completion isearch-string alist)))
1187 ;; isearch-string stays the same
1189 ((or completion ; not nil, must be a string
1190 (= 0 (length isearch-string))) ; shouldnt have to say this
1191 (if (equal completion isearch-string) ;; no extension?
1192 (if completion-auto-help
1193 (with-output-to-temp-buffer "*Isearch completions*"
1194 (display-completion-list
1195 (all-completions isearch-string alist))))
1196 (setq isearch-string completion))
1199 (message "No completion") ; waits a second if in minibuffer
1202 (defun isearch-complete ()
1203 "Complete the search string from the strings on the search ring.
1204 The completed string is then editable in the minibuffer.
1205 If there is no completion possible, say so and continue searching."
1207 (if (isearch-complete1)
1208 (isearch-edit-string)
1213 (defun isearch-complete-edit ()
1214 "Same as `isearch-complete' except in the minibuffer."
1216 (setq isearch-string (buffer-string))
1217 (if (isearch-complete1)
1220 (insert isearch-string))))
1223 ;;;==============================================================
1224 ;; The search status stack (and isearch window-local variables, not used).
1225 ;; Need a structure for this.
1227 (defun isearch-top-state ()
1228 (let ((cmd (car isearch-cmds)))
1229 (setq isearch-string (car cmd)
1230 isearch-message (car (cdr cmd))
1231 isearch-success (nth 3 cmd)
1232 isearch-forward (nth 4 cmd)
1233 isearch-other-end (nth 5 cmd)
1234 isearch-word (nth 6 cmd)
1235 isearch-invalid-regexp (nth 7 cmd)
1236 isearch-wrapped (nth 8 cmd)
1237 isearch-barrier (nth 9 cmd))
1238 (goto-char (car (cdr (cdr cmd))))))
1240 (defun isearch-pop-state ()
1241 (setq isearch-cmds (cdr isearch-cmds))
1245 (defun isearch-push-state ()
1247 (cons (list isearch-string isearch-message (point)
1248 isearch-success isearch-forward isearch-other-end
1250 isearch-invalid-regexp isearch-wrapped isearch-barrier)
1254 ;;;==================================================================
1257 (defun isearch-message (&optional c-q-hack ellipsis)
1258 ;; Generate and print the message string.
1259 (let ((cursor-in-echo-area ellipsis)
1261 (isearch-message-prefix c-q-hack ellipsis isearch-nonincremental)
1263 (isearch-message-suffix c-q-hack ellipsis)
1265 (if c-q-hack m (message "%s" m))))
1267 (defun isearch-message-prefix (&optional c-q-hack ellipsis nonincremental)
1268 ;; If about to search, and previous search regexp was invalid,
1269 ;; check that it still is. If it is valid now,
1270 ;; let the message we display while searching say that it is valid.
1271 (and isearch-invalid-regexp ellipsis
1273 (progn (re-search-forward isearch-string (point) t)
1274 (setq isearch-invalid-regexp nil))
1276 ;; If currently failing, display no ellipsis.
1277 (or isearch-success (setq ellipsis nil))
1278 (let ((m (concat (if isearch-success "" "failing ")
1279 (if isearch-wrapped "wrapped ")
1280 (if isearch-word "word " "")
1281 (if isearch-regexp "regexp " "")
1282 (if nonincremental "search" "I-search")
1283 (if isearch-forward ": " " backward: ")
1285 (aset m 0 (upcase (aref m 0)))
1289 (defun isearch-message-suffix (&optional c-q-hack ellipsis)
1290 (concat (if c-q-hack "^Q" "")
1291 (if isearch-invalid-regexp
1292 (concat " [" isearch-invalid-regexp "]")
1296 ;;;========================================================
1299 (defun isearch-search ()
1300 ;; Do the search with the current search string.
1301 (isearch-message nil t)
1302 (if search-upper-case
1303 (setq isearch-case-fold-search (isearch-no-upper-case-p isearch-string)))
1304 (condition-case lossage
1305 (let ((inhibit-quit nil)
1306 (case-fold-search isearch-case-fold-search))
1307 (if isearch-regexp (setq isearch-invalid-regexp nil))
1308 (setq isearch-success
1312 'word-search-forward 'word-search-backward))
1315 're-search-forward 're-search-backward))
1317 (if isearch-forward 'search-forward 'search-backward)))
1318 isearch-string nil t))
1320 (setq isearch-other-end
1321 (if isearch-forward (match-beginning 0) (match-end 0)))))
1323 (quit (isearch-unread ?\C-g)
1324 (setq isearch-success nil))
1327 (setq isearch-invalid-regexp (car (cdr lossage)))
1329 "\\`Premature \\|\\`Unmatched \\|\\`Invalid "
1330 isearch-invalid-regexp)
1331 (setq isearch-invalid-regexp "incomplete input")))
1333 ;; stack overflow in regexp search.
1334 (setq isearch-invalid-regexp (car (cdr lossage)))))
1338 ;; Ding if failed this time after succeeding last time.
1339 (and (nth 3 (car isearch-cmds))
1341 (goto-char (nth 2 (car isearch-cmds)))))
1345 ;;;========================================================
1348 (defun isearch-highlight (begin end))
1349 (defun isearch-dehighlight (totally))
1351 ;; lemacs uses faces
1353 (defvar isearch-extent nil)
1355 (or (find-face 'isearch) ;; this face is initialized by x-faces.el
1356 (make-face 'isearch)) ;; since isearch is preloaded
1358 (defun isearch-lemacs-highlight (begin end)
1359 (if (null isearch-highlight)
1361 (if (and (extentp isearch-extent)
1362 (eq (extent-buffer isearch-extent) (current-buffer)))
1363 (set-extent-endpoints isearch-extent begin end)
1364 (if (and (extentp isearch-extent)
1365 (bufferp (extent-buffer isearch-extent))
1366 (buffer-name (extent-buffer isearch-extent)))
1367 (delete-extent isearch-extent))
1368 (setq isearch-extent (make-extent begin end (current-buffer))))
1369 (set-extent-face isearch-extent 'isearch)))
1371 (defun isearch-lemacs-dehighlight (totally)
1372 (if (and isearch-highlight isearch-extent)
1374 (let ((inhibit-quit t))
1375 (if (and (extentp isearch-extent)
1376 (bufferp (extent-buffer isearch-extent))
1377 (buffer-name (extent-buffer isearch-extent)))
1378 (delete-extent isearch-extent))
1379 (setq isearch-extent nil))
1380 (if (and (extentp isearch-extent)
1381 (bufferp (extent-buffer isearch-extent))
1382 (buffer-name (extent-buffer isearch-extent)))
1383 (set-extent-face isearch-extent 'default)
1384 (isearch-dehighlight t)))))
1386 (fset 'isearch-highlight (symbol-function 'isearch-lemacs-highlight))
1387 (fset 'isearch-dehighlight (symbol-function 'isearch-lemacs-dehighlight))
1390 ;;;===========================================================
1391 ;;; General utilities
1393 ;; (fset 'isearch-member-equal (symbol-function 'member)) ; for emacs 19
1395 (defun isearch-member-equal (item list)
1396 "Return non-nil if ITEM is `equal' to some item in LIST.
1397 Actually return the list whose car is that item."
1398 (while (and list (not (equal item (car list))))
1399 (setq list (cdr list)))
1403 (defun isearch-no-upper-case-p (string)
1404 "Return t if there are no upper case chars in string.
1405 But upper case chars preceeded by \\ (but not \\\\) do not count since they
1406 have special meaning in a regexp."
1407 (let ((case-fold-search nil))
1408 (not (string-match "\\(^\\|\\\\\\\\\\|[^\\]\\)[A-Z]" string))))
1411 ;;;=================================================
1412 ;;; Special functions for lemacs events.
1414 ;; To quiet the byte-compiler.
1415 (defvar unread-command-event)
1416 (defvar last-command-event)
1418 (defun isearch-char-to-string (c)
1421 (make-string 1 (event-to-character c))))
1423 (defun isearch-text-char-description (c)
1424 (isearch-char-to-string c))
1426 (defun isearch-unread (char-or-event)
1427 ;; General function to unread a character or event.
1429 (isearch-event-data-type
1430 (setq unread-command-event char-or-event))
1431 (isearch-gnu-emacs-events
1432 (setq unread-command-event char-or-event))
1434 (setq unread-command-char char-or-event))))
1436 (defun isearch-last-command-char ()
1437 ;; General function to return the last command character.
1438 (if isearch-event-data-type
1445 ;;;========================================================
1446 ;;; Exiting in lemacs
1448 ;; This is a large amount of code to support automatic termination of
1449 ;; isearch-mode when a command (however it is invoked) is not an
1450 ;; isearch command, or the buffer is switched out from under
1451 ;; isearch-mode. Only later versions of lemacs have the pre-command-hook.
1453 ;;(if isearch-pre-command-hook-exists
1456 ;;;; This list must be modified whenever the available commands are modified.
1457 ;;(mapcar (function (lambda (command)
1458 ;; (put command 'isearch-command t)))
1459 ;; '(isearch-printing-char
1460 ;; isearch-return-char
1461 ;; isearch-repeat-forward
1462 ;; isearch-repeat-backward
1463 ;; isearch-delete-char
1465 ;; isearch-quote-char
1467 ;; isearch-printing-char
1468 ;; isearch-printing-char
1469 ;; isearch-yank-word
1470 ;; isearch-yank-line
1474 ;; isearch-toggle-regexp
1475 ;; isearch-edit-string
1476 ;; isearch-mode-help
1477 ;; isearch-ring-advance
1478 ;; isearch-ring-retreat
1479 ;; isearch-ring-advance-edit
1480 ;; isearch-ring-retreat-edit
1481 ;; isearch-whitespace-chars
1483 ;; isearch-complete-edit
1484 ;; isearch-edit-string
1485 ;; isearch-toggle-regexp
1486 ;; ;; The following may not be needed since isearch-mode is off already.
1487 ;; isearch-forward-exit-minibuffer
1488 ;; isearch-reverse-exit-minibuffer
1489 ;; isearch-nonincremental-exit-minibuffer))
1491 ;;(defun isearch-pre-command-hook ()
1493 ;; ;; For use as the value of `pre-command-hook' when isearch-mode is active.
1494 ;; ;; If the command about to be executed is not one of the isearch commands,
1495 ;; ;; then isearch-mode is turned off before that command is executed.
1497 ;; ;; If the command about to be executed is self-insert-command, or is a
1498 ;; ;; keyboard macro of a single key sequence which is bound to self-insert-
1499 ;; ;; command, then we add those chars to the search ring instead of inserting
1500 ;; ;; them in the buffer. In this way, the set of self-searching characters
1501 ;; ;; need not be exhaustively enumerated, but is derived from other maps.
1503 ;; (isearch-maybe-frob-keyboard-macros)
1504 ;; (if (and (symbolp this-command)
1505 ;; (get this-command 'isearch-command))
1509 ;;(defun isearch-maybe-frob-keyboard-macros ()
1511 ;; ;; If the command about to be executed is `self-insert-command' then change
1512 ;; ;; the command to `isearch-printing-char' instead, meaning add the last-
1513 ;; ;; typed character to the search string.
1515 ;; ;; If `this-command' is a string or a vector (that is, a keyboard macro)
1516 ;; ;; and it contains only one command, which is bound to self-insert-command,
1517 ;; ;; then do the same thing as for self-inserting commands: arrange for that
1518 ;; ;; character to be added to the search string. If we didn't do this, then
1519 ;; ;; typing a compose sequence (a la x-compose.el) would terminate the search
1520 ;; ;; and insert the character, instead of searching for that character.
1522 ;; (cond ((eq this-command 'self-insert-command)
1523 ;; (setq this-command 'isearch-printing-char))
1524 ;; ((and (stringp this-command)
1525 ;; (eq (key-binding this-command) 'self-insert-command))
1526 ;; (setq last-command-char (aref this-command 0)
1527 ;; last-command-event (character-to-event last-command-char)
1528 ;; this-command 'isearch-printing-char))
1529 ;; ((and (vectorp this-command)
1530 ;; (eq (key-binding this-command) 'self-insert-command))
1531 ;; (let* ((desc (aref this-command 0))
1532 ;; (code (cond ((integerp desc) desc)
1533 ;; ((symbolp desc) (get desc character-set-property))
1535 ;; (and (null (cdr desc))
1536 ;; (get (car desc) character-set-property)))
1539 ;; (setq last-command-char code
1540 ;; last-command-event (character-to-event last-command-char)
1541 ;; this-command 'isearch-printing-char))))